Mizuno T24 White Satin Wedge
The revolutionary QuadCut+ Grooves offer unprecedented spin rates on all of your shots – regardless of where they fall on the clubface. On top of that, Craftsman Refined Topline Mass ensures even greater control and accuracy when you hit. To guarantee stability and shot selection even on those elusive wet days, Mizuno employed HydroFlow Technology to create an incredibly enjoyable playability regardless of conditions. And with Loft Specific Profile and Spin-Weighted Blade Design features built right in, you can trust every single swing you take.
Features
- FORGED IN HIROSHIMA JAPAN – One-piece Grain Flow Forged HD Boron in Hiroshima, Japan – where Mizuno irons have been produced since 1968.
- QUADCUT+ GROOVES – An adjustment of the groove shoulder camber and the taper of the groove profile allows a tighter groove pattern for increased spin rates on all shots.
- CRAFTSMAN REFINED TOPLINE – Mass taken from the toe portion, and a lower hosel blend creates a smaller profile without loss of effective hitting area.
- WET WEATHER PERFORMANCE – Mizuno’s HydroFlow Micro Grooves are laser etched to release moisture and reduce spin drop-off.
- WRAP-AROUND SOLE RELIEF – Increased sole relief to heel and toe across all 5 grind options.
- LOFT SPECIFIC PROFILE – Straight leading edge on lower lofts (to 51), into traditional teardrop, and more rounded lob wedges (58 and above).
- SPIN-WEIGHTED BLADE DESIGN – A flared upper portion of the blade creates higher spin and penetrating trajectory – particularly from strikes high on the clubface.
- THREE FINISH OPTIONS – Soft White Satin (with copper underlay), Denim Copper and Tour Raw
Grinds
- S Grind – High Bounce with limited relief. For full shots
- D Grind – Mid Bounce with moderate relief for gentle manipulation
- C Grind – Mid / High Bounce with generous relief for across a wide range of players / conditions
- V Grind – High Bounce with aggressive relief for versatility and steeper attack
- X Grind – Low Bounce with aggressive relief for versatility and shallow arttack
Information
- Head – Grain Flow Forged
- Lofts – 46° – 60°
- 2 Year Warranty
Stock Grip & Shaft
- Shaft: Dynamic Gold Tour Issue S400
- Grip: Golf Pride Cord Z-Grip
Specs
T24 PITCHING WEDGES SPECIFICATIONS
| Club # | Loft ° | Lie Angle | UN Length | 60° Length | Bounce | Profile |
| 46/08 | 46 | 63 | 35.5″ | 35.75″ | 8 | S |
| 48/10 | 48 | 63 | 35.5″ | 35.75″ | 10 | S |
Dexterity: RH Only
T24 GAP WEDGES SPECIFICATIONS
| Club # | Loft ° | Lie Angle | UN Length | 60° Length | Bounce | Profile |
| 50/08 | 50 | 63 | 35.25″ | 35.5″ | 8 | S |
| 52/10 | 52 | 63 | 35.25″ | 35.5″ | 10 | S |
Dexterity: RH & LH (white satin only)
T24 SAND WEDGES SPECIFICATIONS
| Club # | Loft ° | Lie Angle | UN Length | 60° Length | Bounce | Profile |
| 54/08 | 54 | 63 | 35.25″ | 35.5″ | 8 | D |
| 54/10 | 54 | 63 | 35.25″ | 35.5″ | 10 | S |
| 56/06 | 56 | 63 | 35.25″ | 35.5″ | 6 | C |
| 56/08 | 56 | 63 | 35.25″ | 35.5″ | 8 | V |
| 56/10 | 56 | 63 | 35.25″ | 35.5″ | 10 | D |
| 56/12 | 56 | 63 | 35.25″ | 35.5″ | 12 | S |
Dexterity: RH & LH (white satin only)
T24 LOB WEDGES SPECIFICATIONS
| Club # | Loft ° | Lie Angle | UN Length | 60° Length | Bounce | Profile |
| 58/04 | 58 | 63 | 35.25″ | 35.5″ | 4 | X |
| 58/08 | 58 | 63 | 35.25″ | 35.5″ | 8 | C |
| 58/10 | 58 | 63 | 35.25″ | 35.5″ | 10 | V |
| 58/12 | 58 | 63 | 35.25″ | 35.5″ | 12 | D |
| 60/06 | 60 | 63 | 35.25″ | 35.5″ | 6 | X |
| 60/10 | 60 | 63 | 35.25″ | 35.5″ | 10 | C |
| 60/12 | 60 | 63 | 35.25″ | 35.5″ | 12 | V |
